Pipe Fittings Supplier is a flagship company of Universal Group based in Mumbai, India. Veritas is engaged in Manufacturer of Steel Fitting, Flange & Fasteners. We also stock Pipe, Tubes, Plates,Sheets, Bars, Valve & other customized Engineering Product in various steel grade,specialized in Stainless Steel, Nickel Alloys, Alloy Steel & Carbon Steel.
Delivering quality product is our prime concern and all our manufacturing is done at Vasai & Wada Plant. We carry out production & machining of critical components under strict quality control as per international standards.
We at UNIVERSAL firmly believe in enhancing the satisfaction levels of our customers by manufacturing and supplying forged fittings that provide maximum value for their money.
Our philosophy is that, improving all aspects of our products and services has to be an on-going process and we are therefore committed to.Anticipating the changing requirements of our customers and other stake-holders and complying with these requirements.
Continual improvement of our business processes. Trained and motivated employees are thepillars of our organization and we are confident of achieving the above with their continuedsupport and dedication.
Get more information
After having a 38 years of experience in the field of Export of forged components to various manufacturers and distributors in USA, UK, European and Middle East countries, theCompany has decided to go for expansion in forging capacities by putting up Forging Presses,Ring Rolling to capture the market of Oil and Gas Industries and Petrochemical refineries. TheCouncil has awarded the company’s product as qualityexcellence
Production Range of Buttwelded Pipe Elbow
Outside Diameter: Seamless Elbow ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
Wall Thickness: 3mm – 40mm / SCH5, SCH10, SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
Bending Radius: R=1D – 10D, 15D, 20D
Product’s Angle: 5° – 180° Elbows, 90° and 45° Long Radius Elbows , 180° Long Radius Returns , Short Radius Elbows and Returns
Value Added Services: Hot Dipped Galvanizing, Epoxy & FBE Coating, Electro Polish, Sand Blasting, Threading, Soldering
Production Grades: Stainless Steel, Alloy Steel, Duplex, High Nickel Alloys, Low temperature Steel, Carbon Steel, Cupro Nickel
Manufacturing Standards of Pipe Elbow
ASME: ANSI B16.9, ANSI B16.28, MSS-SP-43
DIN: DIN2605, DIN2615, DIN2616, DIN2617, DIN28011
EN: EN10253-1, EN10253-2
ASTM A403 – ASME SA403 – Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
ASME B16.9 – Factory-Made Wrought Fittings Buttwelding
ASME B16.25 – Buttwelding Ends ASME B16.28 – Wrought Steel Short Radius Elbows and Buttwelding Returns
MSS SP-43 – Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications
Material Grades - Pipe Elbow
- Stainless Steel Elbow; ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
- Carbon Steel Elbow: ASTM A 234 WPB , WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
- Low Temperature Carbon Steel Elbow: ASTM A420 WPL3, A420 WPL6
- Alloy Steel Elbow: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
- Duplex Steel Elbow: ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Werkstoff No. 1.4462
- High Nickel Alloy Elbow: ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )
Materials and Grade : Forged 90° Socket weld Pipe Elbow
| Specification | : | ASTM A182, ASTM SA182 |
| Dimension | : | ANSI B 16.11 |
| Size | : | 1/4″ NB TO 4″ NB |
| Class | : | 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS |
| Range | : | Coupling, Plug, Socket, Bushing, Elbow, Tee, Nipple, Union,Threading Outlet, Welding Outlet, Sockt Weld Outlet. |
| Stainless Steel Socket Weld 90° Forged Elbow | : | ASTM A182 F304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L |
| Duplex Steel Socket Weld 90° Forged Elbow | : | ASTM A 182 –F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61 S 31803, S 32205, S 32550, S 32750, S 32760 |
| Carbon Steel Socket Weld 90° Forged Elbow | : | ASTM/ ASME A 105, ASTM/ ASME A 350 LF 2 |
| Alloy Steel Socket Weld 90° Forged Elbow | : | ASTM / ASME A 182 GR F 5, F 9, F 11, F 12, F 22, F 91. |
| Copper Alloys Socket Weld 90° Forged Elbow | : | ASTM / ASME SB 111 UNS NO. C 10100 , C 10200 , C 10300 , C 10800 , C 12000, C 12200, C 70600 C 71500 ASTM / ASME SB 466 UNS NO. C 70600 ( CU -NI- 90/10) , C 71500 ( CU -NI- 70/30) |
| High Nickel Alloy Socket Weld 90° Forged Elbow | : | ASTM / ASME SB 336, ASTM / ASME SB 564 / 160 / 163 / 472, UNS 2200 (NICKEL 200) , UNS 2201 (NICKEL 201 ) , UNS 4400 (MONEL 400 ) , UNS 8020 ( ALLOY 20 / 20 CB 3 ) , UNS 8825 INCONEL (825) , UNS 6600 (INCONEL 600 ) , UNS 6601 (INCONEL 601) , UNS 6625 (INCONEL 625) , UNS 10276 (HASTELLOY C 276) |
ASME/ANSI B16.9 Long & Short Radius Elbows Dimensions
All Different Types Of Pipe Elbow at Discounted Price
- 90 Degree Elbow
- 45 Degree Elbow
- 180 Degree Elbow
- Elbow Fittings
- Long Radius Elbow
- Short Radius Elbow
- 90° Long Radius Elbow
- 90° Short Radius Elbow
- 45° Long Radius Elbow
- 45° Short Radius Elbow
- 180° Long Radius Elbow
- 180° Short Radius Elbow
- 1D Elbow
- 3D Elbow
- 5D Elbow
features of Elbows are categorized based on various design
- Long Radius (LR) Elbows – radius is 1.5 times the pipe diameter
- Short Radius (SR) Elbows – radius is 1.0 times the pipe diameter
- 90 Degree Elbow – where change in direction required is 90°
- 45 Degree Elbow – where change in direction required is 45°
Elbows 45° - 90° - 180° LR/SR
The function of a elbow is to change direction or flow in a piping system. By default, there are 5 opportunities, the 45°, 90° and 180° elbows, all three in the "long radius" version, and in addition the 90° and 180° elbows both in the "short radius" version.
Long Radius Elbow and Short Radius Elbow
Elbows are split into two groups which define the distance over which they change direction; the center line of one end to the opposite face. This is known as the "center to face" distance and is equivalent to the radius through which the elbow is bent.
The center to face distance for a "long" radius elbow, abbreviated LR always is "1½ x Nominal Pipe Size (NPS) (1½D)", while the center to face distance for a "short" radius elbow, abbreviated SR even is to nominal pipe size.
1. 90°-LR : = 1½ x 2(NPS) x 25.4 A=76.2 mm
2. 180°-LR : = 2 times the 90° LR elbow A=152.4 mm
3. 90°-SR : = 2(NPS) x 25.4 A=50.8 mm
4. 180°-SR : = 2 times the 90° SR elbow A=101.6 mm
Short Radius Pipe Elbow 90 Degree
| Nominal
Pipe Size | Outside
Diameter | Inside
Diameter | Wall
Thickness | Center
To End | Pipe
Schedule | Weight Pounds |
| 1 | 1.32 | 1.05 | 0.133 | 1 | 40 | 0.25 |
| 1 1/4 | 1.66 | 1.38 | 0.14 | 1.25 | 40 | 0.39 |
| 1 1/2 | 1.9 | 1.61 | 0.145 | 1.5 | 40 | 0.53 |
| 2 | 2.38 | 2.07 | 0.154 | 2 | 40 | 0.97 |
| 2 1/2 | 2.88 | 2.47 | 0.203 | 2.5 | 40 | 2 |
| 3 | 3.5 | 3.07 | 0.216 | 3 | 40 | 3 |
| 3 1/2 | 4 | 3.55 | 0.226 | 3.5 | 40 | 4.3 |
| 4 | 4.5 | 4.03 | 0.237 | 4 | 40 | 6.1 |
| 5 | 5.56 | 5.05 | 0.258 | 5 | 40 | 9.7 |
| 6 | 6.63 | 6.07 | 0.28 | 6 | 40 | 16.7 |
| 8 | 8.63 | 7.98 | 0.322 | 8 | 40 | 32.4 |
| 10 | 10.75 | 10.02 | 0.365 | 10 | 40 | 56.3 |
| 12 | 12.75 | 12 | 0.375 | 12 | * | 79.4 |
| 14 | 14 | 13.25 | 0.375 | 14 | 30 | 104 |
| 16 | 16 | 15.25 | 0.375 | 16 | 30 | 129 |
| 18 | 18 | 17.25 | 0.375 | 18 | * | 163 |
| 20 | 20 | 19.25 | 0.375 | 20 | 20 | 210 |
| 24 | 24 | 23.25 | 0.375 | 24 | 20 | 297 |
| 30 | 30 | 29.25 | 0.375 | 30 | * | 480 |
| 36 | 36 | 35.25 | 0.375 | 36 | * | 692 |
| 42 | 42 | 41.25 | 0.375 | 42 | * | 967 |
| 48 | 48 | 47.25 | 0.375 | 48 | * | 1,340 |
Dimensions of Butt Weld Pipe Elbow 180° LR & SR ASME B16.9 (180° long radius Elbow, 180° short radius pipe elbow)
| NPS | O.D. D | 180° Long Rad | 180° Short Rad | ||
| Center to Center O | Back to Face K | Center to Center O | Back to Face K | ||
| 1/2 | 21.3 | 76 | 48 | ... | ... |
| 3/4 | 26.7 | 76 | 51 | ... | ... |
| 1 | 33.4 | 76 | 56 | 51 | 41 |
| 1¼ | 42.2 | 95 | 70 | 64 | 52 |
| 1½ | 48.3 | 114 | 83 | 76 | 62 |
| 2 | 60.3 | 152 | 106 | 102 | 81 |
| 2½ | 73 | 190 | 132 | 127 | 100 |
| 3 | 88.9 | 229 | 159 | 152 | 121 |
| 3½ | 101.6 | 267 | 184 | 178 | 140 |
| 4 | 114.3 | 305 | 210 | 203 | 159 |
| 5 | 141.3 | 381 | 262 | 254 | 197 |
Dimensional tolerances of butt weld elbows 180° lr and sr asme b16.9 (180° long radius Elbow, 180° short radius pipe elbow)
| Nominal Pipe Size | 1/2 to 2½ | 3 to 3½ | 4 |
| Outside Diameter at Bevel (D) |
+ 1.6 - 0.8 |
1.6 | 1.6 |
| Inside Diameter at End | 0.8 | 1.6 | 1.6 |
| Center to Center (O) | 6 | 6 | 6 |
| Back to Face (K) | 6 | 6 | 6 |
| Nominal Pipe Size | 5 to 8 | 10 to 18 | 20 to 24 |
| Outside Diameter at Bevel (D) |
+ 2.4 - 1.6 |
+ 4 - 3.2 |
+ 6.4 - 4.8 |
| Inside Diameter at End | 1.6 | 3.2 | 4.8 |
| Center to Center (O) | 6 | 10 | 10 |
| Back to Face (K) | 6 | 6 | 6 |
| Wall Thickness (t) | Not less than 87.5% of Nominal Wall Thickness | ||
90° Elbow Dimensions - (90° long radius Elbow, 90° short radius pipe elbow)
|
Pipe Size |
Inside Diameter (ID) |
Long Radius (E) |
Short Radius (E) |
|
inches |
inches |
inches |
inches |
|
1 |
1 |
1.5 |
1 |
|
1.5 |
1.5 |
2.25 |
1.5 |
|
2 |
2 |
3 |
2 |
|
2.5 |
2.5 |
3.-3/4 |
2.5 |
|
3 |
3 |
4.5 |
3 |
|
3.5 |
3.5 |
5-1/4 |
3.5 |
|
4 |
4 |
6 |
4 |
|
6 |
6 |
9 |
6 |
|
8 |
8 |
12 |
8 |
|
10 |
10 |
15 |
10 |
|
12 |
12 |
18 |
12 |
|
14 |
14 |
21 |
14 |
|
16 |
16 |
24 |
16 |
|
18 |
18 |
27 |
18 |
|
20 |
20 |
30 |
20 |
|
24 |
24 |
36 |
24 |
|
30 |
30 |
45 |
30 |
|
36 |
36 |
54 |
36 |
|
42 |
42 |
63 |
42 |
0° Elbow Dim
Dimensions - 45° Elbow
|
Pipe Size |
Inside Diameter (ID) |
Center to Face (G) |
|
inches |
inches |
inches |
|
1 |
1 |
|
|
1.5 |
1.5 |
|
|
2 |
2 |
|
|
2.5 |
2.5 |
|
|
3 |
3 |
|
|
3.5 |
3.5 |
|
|
4 |
4 |
2-1/2 |
|
6 |
6 |
3-3/4 |
|
8 |
8 |
5 |
|
10 |
10 |
6-1/4 |
|
12 |
12 |
7-1/2 |
|
14 |
14 |
8-3/4 |
|
16 |
16 |
10 |
|
18 |
18 |
11-1/4 |
|
20 |
20 |
12-1/2 |
|
24 |
24 |
15 |
|
30 |
30 |
18-5/8 |
|
36 |
36 |
22-1/2 |
|
42 |
42 |
26 |
Pipe Elbow - Weights
| WEIGHTS OF FITTINGS | ||||||||
| NPS inches |
ELBOWS LR 90° |
ELBOWS SR 90° |
||||||
| Sch. 5S |
Sch. 10S |
Sch. 40S |
Sch. 80S |
Sch. 5S |
Sch. 10S |
Sch. 40S |
Sch. 80S |
|
| 1/2 | 0.05 | 0.06 | 0.08 | 0.10 | 0.03 | 0.04 | 0.05 | 0.07 |
| 3/4 | 0.06 | 0.07 | 0.09 | 0.11 | 0.04 | 0.05 | 0.06 | 0.07 |
| 1 | 0.09 | 0.15 | 0.18 | 0.20 | 0.06 | 0.10 | 0.12 | 0.13 |
| 1 1/4 | 0.13 | 0.20 | 0.25 | 0.35 | 0.09 | 0.13 | 0.17 | 0.12 |
| 1 1/2 | 0.18 | 0.30 | 0.40 | 0.50 | 0.12 | 0.20 | 0.27 | 0.33 |
| 2 | 0.30 | 0.50 | 0.70 | 0.90 | 0.20 | 0.33 | 0.47 | 0.60 |
| 2 1/2 | 0.60 | 0.85 | 1.35 | 1.80 | 0.40 | 0.60 | 0.90 | 1.20 |
| 3 | 0.90 | 1.30 | 2.00 | 2.90 | 0.60 | 0.90 | 1.35 | 1.90 |
| 4 | 1.40 | 2.00 | 4.00 | 5.90 | 0.90 | 1.35 | 2.65 | 3.90 |
| 5 | 2.90 | 3.60 | 6.50 | 9.70 | 1.95 | 2.40 | 4.35 | 6.50 |
| 6 | 4.00 | 5.00 | 10.5 | 16.0 | 2.70 | 3.35 | 7.00 | 10.5 |
| 8 | 7.40 | 10.0 | 21.5 | 33.5 | 4.90 | 6.70 | 14.5 | 22.5 |
| 10 | 13.6 | 16.8 | 38.5 | 52.5 | 9.10 | 11.2 | 25.6 | 35.0 |
| 12 | 23.4 | 27.0 | 59.0 | 79.0 | 15.6 | 18.0 | 39.5 | 53.0 |
| 14 | 29.0 | 35.0 | 70.0 | 94.0 | 19.3 | 23.5 | 47.0 | 63.0 |
| 16 | 41.3 | 47.0 | 95.0 | 125 | 27.5 | 31.5 | 63.5 | 84.0 |
| 18 | 51.8 | 59.0 | 120 | 158 | 34.5 | 39.5 | 80.0 | 105 |
| 20 | 73.0 | 85.0 | 146 | 194 | 49.0 | 57.0 | 98.0 | 129 |
| 24 | 122 | 140 | 210 | 282 | 82.0 | 94.0 | 140 | 188 |
| Approximate weights in kg, density 8 kg/dm3 | ||||||||
Pipe Elbow - End welding bevels
